該螺旋喂料機適用于干燥粉狀物料(如煤粉、水泥、谷物、砂石等)的均勻連續供料。 該設備采用擺線針輪減速機，加裝VF變頻器，調速范圍廣，運轉平穩、噪聲低、結構緊湊、體積小，可以方便地調節物料流量，滿足不同生產工藝要求。
        Screw feeder is used to convey dry and powder material (Such as coal powder, cement, grain and sand etc.) etc. even and continuous material.  Screw conveyor is used cycloid needle wheel reducer and VF variable frequency meter. It is charac?terized by wide range, stable operation, low noise, tight structure and small volume. It is convenient to adjust material flow and meet different manufacture workman requirement.

技術參數

喂料能力計算
        Q=2*60π/4（D2-d2）(S-δ)nФ
        式中:
       Q—雙管螺旋喂料機的喂料能力（m3/h） δ—螺旋葉厚度（m）
       D—螺旋評直徑（m）  n—螺旋的轉速（r/min）
       D—螺旋桿直徑（m）  Ф—物料的充滿系數(一般=0.9）
       s—螺旋的螺距（m）

In the formula
Q means the feeding capacity of double pipe screw conveyor(m3/h)，5 means the thickness of screw impeller. D means the diameter of screw(m), n means the speed of screw.
D means the diameter of screw pole, filling factor of material(usually it is equal to 0.9.)
S means the pitch of screw.

外形圖及連接尺寸